Видео

It's 2024, and this video just saved me $500! Huge thank you for this video. I would've had a horrible time trying to take out those roll pins without the drilling advice.

What can I say? Absolutely great video. Everything so clear. Thanks so much!

Ive found out that the roll pin can be removed by screwing a small screw inside the pin and pulling it out with pliers, way easier than drilling :)

Does this works with a Honda Fit 2012

I wish you were in West Tennessee

If one key is damaged completely how do u program the new one to work for push start 2012 Dodge Durango.. I can't access my keyless entry or push start but it cranks it manually and unlocks the door and everything else..

Thank you, thank you for this excellent tutorial. You saved me my job yesterday for sure as I found myself stuck on a holiday. I fixed my 04' CRV with this method. The hardest part was removing the first roll pin with the steering lock assembly still attached as I didn't want to remove the breakaway bolts. I was worried about drilling too close to that pin but it all worked out exactly as described.

Do the pins need to be reinserted for the device to work? I destroyed the pins when removing them and I still cant get the car the key to turn. I took all the wafers out of the tumbler and tested the device in my hand to make sure it spun freely. After carefully putting it back into the steering column, the key would not turn.

My key won't even go in!??

i have hotwire, but where can i download software?

So when im trying to take out the 4th screw its seem impossible as my turn signal is in the way do you have any advice how to get to the screw without having to take out more parts of the steering wheel to get to it?

How much should this cost for a 2016 ford edge sport ? I lost both my key fobs 😅

I want to know how that big yello stick goes together, can you show that? You skiped over it

Thanks for this video this help iut a lot i was able to take it a part and was done like in 30 min thanks.

Great vid Thanks for you time 💪🏽

The locksmith in my town quoted me $720 to replace my ignition switch assembly and cut/program 2 new keys. He didn't even give the option of rebuilding the locking mechanism. I was able to follow your directions and save all that money. It only took me about 3 hours from start to finish, and I'm not the most mechanically inclined person in the world. Thank you very much! Now my 18 year old vehicle with 200,000 miles on it is ever so slightly less secure. OHHH NOOO!!! LOL

Your vid just saved me an insane fee for a remote locksmith on a public holiday. Thank you so much for your service.

Cómo puedo conseguir o comprar estás herramientas soy dé México

Good video. Size of drill bit would be helpful

Thank you!!!!!

Perfecto

I've had these for 2 years now and never used them. ill have to give this a try.

*I did this and the check engine and anti-theft lights stay on, I towed my Civic to a real locksmith, mentioned your video - he said you're a hack*

Thanks for this video,

Damn I need to do this. My Honda got stolen just after new years and the person who stole it jammed my whole ignition.. it can’t lock at all and drained the hell out my battery. If this is how I can change my ignition to lock again please do lmk. I miss my baby so much 🥺😭

this video made me seve money more than 500$ for machanic thanks a lot 😊

My key got stuck inside the cylinder, which is halfway turned. Can't get the key out but still I'm going to try this. Thanks!

If only adding a key do you need to program the original key again? Sometimes my programmer says hold the first key to start button. Does that mean the original or first new key being programmed? Also At the start it says to tap start button with key. Is that the original or the new key I’m supposed to Be tapping it with?

Great video. I was able to fix the ignition with no money and a little time. Thanks!

Can this be done with the original keys? Both of mine trigger a "key fob not detected" indication on the dash.

I have a question 🙋 the lock will work when I take out a couple stuck wayfarers? I don’t have to replace them? Thanks in advance

Is it possible to swap an ignition switch solenoid off a used unit and out it on my current one to avoid all this? My key gets stuck in first position regularly. Thanks man

OMG thank you so much for this video and yes it’s still saving people money after all this time thanks again

Dude this video is awesome man thank you

Thank you for this excellent tutorial! You saved me hundreds of dollars I don’t have!!!

Thank you so much works like a charm

AWWWsome video, I like the small pic inserts you put in the video. Very impressed with the complete instructions. A++

Thanks!

Thank you! Just letting you know you have free beers if you ever come to Western Australia😊

You saved me lots of money instead of going to Honda for a new cylinder. Thank you very very much 🙏

on a 1990 Honda Accord the illumination light that lights up around the key cylinder stays on all the time, what would be the cause of that? any info would be very appreciated.

Excellent video

much better than other videos out there ...

how did you apply the metal epoxy ?

You sound like Mark Alan Ruffalo 😂

Do I have to take the whole assembly out?

Locksmiths HATE this one simple trick.

what lubricant do you use?

James bond shit

Thanks for the video!!! Just performed this fix!! Was wondering if you knew what that wire you took off did? It goes to a solenoid/relay under that plastic cap. My lock assembly was full of wd40 and gunk so i wiped it down well and took the plastic cap off and air sprayed it clean. Put everything back and reassembled the column. The car starts but now i get the "keys are in ignition" beep when its not... This unfortunately also disables my remote door fob.... Update on the remote door fob not working, turns out that the "key inserted" micro switch was held closed by the long bar that goes to the back and past the cylinder was reinstalled incorrectly. There is a spring and a plastic cap that holds the bar in place. At first I put the spring, bar, cap back together. But it has to be bar, spring cap. This will position the bar correctly and then it will not keep the micro switch closed. Then the key is sensed as not in the ignition and the remote fob will return to normal function..